Rigol 2000 Series Programming Guide

RIGOL 2 Command System
2-80 MSO2000A/DS2000A Programming Guide
:CURSor:MANual:AXValue?
:CURSor:MANual:AYValue?
Syntax
:CURSor:MANual:AXValue?
:CURSor:MANual:AYValue?
Description
Query the X or Y value at cursor A in manual cursor measurement.
Explanation
 For the horizontal position of cursor A, refer to the
:CURSor:MANual:CAX command. The unit is
determined by the horizontal unit currently selected (refer to the
:CURSor:MANual:TUNit command).
 For the vertical position of cursor A, refer to the
:CURSor:MANual:CAY command. The unit is
determined by the vertical unit currently selected (refer to the
:CURSor:MANual:VUNit command).
Return Format
The query returns the X or Y value at cursor A in scientific notation. When the measurement source is LA
(
:CURSor:MANual:SOURce), the :CURSor:MANual:AYValue? Command returns a decimal integer (the
sum of the binary weights of D15-D0).
:CURSor:MANual:BXValue?
:CURSor:MANual:BYValue?
Syntax
:CURSor:MANual:BXValue?
:CURSor:MANual:BYValue?
Description
Query the X or Y value at cursor B in manual cursor measurement.
Explanation
 For the horizontal position of cursor A, refer to the
:CURSor:MANual:CBX command. The unit is
determined by the horizontal unit currently selected (refer to the
:CURSor:MANual:TUNit command).
 For the vertical position of cursor A, refer to the
:CURSor:MANual:CBY command. The unit is
determined by the vertical unit currently selected (refer to the
:CURSor:MANual:VUNit command).
Return Format
The query returns the X or Y value at cursor B in scientific notation.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English