Rigol 2000 Series Programming Guide

RIGOL 2 Command System
2-154 MSO2000A/DS2000A Programming Guide
:MEASure:FREQuency
Syntax 1
:MEASure:FREQuency <chan>
Description 1
Enable the frequency measurement function of the specified channel.
Syntax 2
:MEASure:FREQuency? <chan>
Description 2
Enable the frequency measurement function of the specified channel and return the measurement result
(the unit is Hz).
Parameter
Name Type Range Default
<chan> Discrete
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|
D12|D13|D14|D15|CHANnel1|CHANnel2|MATH}
--
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:FREQuency CHANnel1
:MEASure:FREQuency? CHANnel1
You can use the following commands to query the statistic maximum, minimum, current value, average
and standard deviation of the frequency measurement values of the specified channel waveform. Sending
the following commands will enable the statistic function automatically.
 :MEASure:FREQuency:SMAXimum?
 :MEASure:FREQuency:SMINimum?
 :MEASure:FREQuency:SCURrent?
 :MEASure:FREQuency:SAVerage?
 :MEASure:FREQuency:SDEViation?

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English