Rigol 2000 Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-137
:MEASure:CLEar
Syntax
:MEASure:CLEar <item>
Description
Clear any or all of the last five measurement items that are enabled.
Parameter
Name Type Range Default
<item> Discrete {ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL} --
Explanation
The last five measurement items are derermined according to the order in which they are enabled and
they will not change as you delete one or more measurement items. The last item enabled is ITEM5. You
can also use the
:MEASure:RECover command to recover one or more measurement items that you have
cleared.
:MEASure:RECover
Syntax
:MEASure:RECover <item>
Description
Recover the measurement items that have been cleared.
Parameter
Name Type Range Default
<item> Discrete {ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL} --
Explanation
The last five measurement items are derermined according to the order in which they are enabled and
they will not change as you delete one or more measurement items. The last item enabled is ITEM5. You
can also use the
:MEASure:CLEar command to clear one or more measurement items that you have
recovered.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English