Rigol 2000 Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-307
:TRIGger:SLOPe
 :TRIGger:SLOPe:ALEVel
 :TRIGger:SLOPe:BLEVel
 :TRIGger:SLOPe:TLOWer
 :TRIGger:SLOPe:TUPPer
 :TRIGger:SLOPe:SOURce
 :TRIGger:SLOPe:WHEN
 :TRIGger:SLOPe:WINDow
:TRIGger:SLOPe:ALEVel
:TRIGger:SLOPe:BLEVel
Syntax
:TRIGger:SLOPe:ALEVel <level>
:TRIGger:SLOPe:ALEVel?
:TRIGger:SLOPe:BLEVel <level>
:TRIGger:SLOPe:BLEVel?
Description
Set or query the upper limit or lower limit of the trigger level in slope trigger. The unit is the same with the
current amplitude unit.
Parameter
Name Type Range Default
<level> Real -5×VerticalScale–OFFSet to +5×VerticalScale–OFFSet 0
Note: For the VerticalScale, refer to the :CHANnel<n>:SCALe command. For the OFFSet, refer to
the
:CHANnel<n>:OFFSet command.
Return Format
The query returns the upper or lower limit of the trigger level in scientific notation.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English