Rigol 2000 Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-245
 TLEVel: press down the trigger level adjustment knob; namely set the trigger level to 0.
 TMENu: press MENU in the trigger control area.
 TFORce: press FORCE in the trigger control area.
 TMODe: press MODE in the trigger control area.
 RSTop: press RUN/STOP.
 QPRInt: press the print key.
 SRECord|ERECord: start or stop recording waveforms.
 PPAuse: start, pause or resume the playback of the recorded waveform (only valid when waveforms
are recorded).
 FFP10|FFP20|FFP30|FFP40|FFP50|FFP60|FFP70: rotate the outer layer of the navigation knob
clockwise. The number in the paramerter denotes the rotation step. Larger number corresponds to
faster rotating speed.
 FFN5|FFN10|FFN20|FFN30|FFN40|FFN50|FFN60|FFN70: rotate the outer layer of the navigation
knob counterclockwise. The number in the paramerter denotes the rotation step. Larger number
corresponds to faster rotating speed.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English