Rigol 2000 Series Programming Guide

RIGOL 2 Command System
2-20 MSO2000A/DS2000A Programming Guide
:BUS<n>:PARallel:SLOPe
Syntax
:BUS<n>:PARallel:SLOPe <pos>
:BUS<n>:PARallel:SLOPe?
Description
Set or query the edge of the clock on which the oscilloscope samples the channel data.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<pos> Discrete {POSitive|NEGative|BOTH} POSitive
Explanation
 POSitive: rising edge
NEGative: falling edge
BOTH: rising/falling edge
 When no clock channel is set (refer to the
:BUS<n>:PARallel:CLK command), the oscilloscope
samples data once the channel data jumps and the edge set by this command will be ignored.
Return Format
The query returns POS, NEG or BOTH
.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English