Rigol DG3000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for Logic Signal Output Module
2-20
(1) Save
Press Save, to enter the data saving interface. Enter a filename by using the
displayed keyboard. The instrument supports both Chinese and English inputs.
 Chinese input
Example: To enter the filename “数字波”.
Press F1 to select Chn_S.
Figure 2-21 Input Chinese filename
Use the knob to choose “s”; press SELECT to confirm the selection. Repeat
with “h” and “u”; the input field will display a series of matching Chinese
characters. Use the direction key to look for the characters “数” as shown in
Figure 2-21. Press “4” in the keypad on the front panel of the DG3000.
Repeat the above process to input “字” and “波”. To delete a character, use the
direction key to select it and then press Delete. When finished, press
End/Store to end the storage.