Rigol DG3000 Series

To Next Page

To Previous Page

RIGOL

User‟s Guide for Logic Signal Output Module

2-21

 English input

Example: To enter the filename “digital” as shown in Figure 2-22.

Press F1 to select En.

Figure 2-22 Input English filename

Use the knob to choose “d”; press SELECT to confirm the selection. Repeat until

“digital” completed. To delete a character, use the direction key to select it and

then press Delete. When finished, press End/Store to end the storage.

The final results after the examples above are as shown in Figure 2-23.

Figure 2-23 Save and recall interface