User Data Editing
Press DataEdt to open the digital waveform editing interface (for editing method,
refer to “
User-defined Code Pattern”). Users can edit up to 131072 Words (262144
Bytes) of data. Note the user-edited data can be output only when the code pattern is
set to “User”.
The storage of the data displayed in the data editing area in the internal memory is as
follows:
Address Data Address Data
00000000 0x08 00000006 0x24
00000001 0x00 00000007 0x00
00000002 0x80 00000008 0x00
00000003 0x01 00000009 0x18
00000004 0x02 0000000A 0x00
00000005 0x03 0000000B 0x02
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
