RIGOL Chapter 1 Quick Start
User’s Guide for DG5000
1-18
Installation Tool
PH2 Phillips Screwdriver (recommended).
Space Requirements for Installation
The following requirements must be fulfilled by the machine cabinet in which the
instrument is mounted.
Dimension of the machine cabinet must be standard 19-inch.
At least 3U (133.5 mm) space should be provided by the machine cabinet.
The depth inside the machine cabinet should not be less than 530 mm.
The dimension of the instrument after being mounted is shown below.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
