RIGOL Chapter 1 Quick Start
User’s Guide for DG5000
1-14
Power on the Generator
Connect the generator to the AC supply by using the supplied power cord, and then
perform the following steps.
1. Turn on the power of the instrument
Turn on the power switch at the rear panel of the instrument.
WARNING
To avoid electric shock, make sure the instrument has been properly
grounded.
2. Start-up the instrument
Press down the power key at the front panel. The instrument starts and executes
self-test and then enters the user interface.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
