Stored Waveform
Select arbitrary waveforms stored in internal non-volatile memory (C Disk) or external
memories (D Disk or E Disk).
Press this softkey to enter the Store/Recall Interface and the Store/Recall key on
the front panel is illuminated. Please select and read the desired arbitrary waveform
file. For more details, please refer to “
Store and Recall”. Waveform data in volatile
memory will be changed after the file is read. To return arbitrary waveform setting
interface, press the Arb.
Volatile Waveform
Select arbitrary waveform currently stored in the volatile memory. Note that this menu
would be unavailable if there is no waveform data in volatile memory currently. To fill
up the volatile memory, you can create a waveform through “Create New” or select a
waveform from “Built-In” or “Stored Wforms”.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
