RIGOL Chapter 1 Quick Start
User’s Guide for DG5000
1-20
3. Place the instrument: align the protection pads of the instrument with the
corresponding holes and then place it on the Support Board.
4. Fixed the instrument: Fasten the instrument tightly on the Support Board with
two Fixed Figures and fixed it with four M4 screws.
5. Install the Front Panel: aiming the instrument front panel at the opening of the
Front Panel of the machine rack and fix them with four M4 screws.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
