Rigol DS6062-DEMO

RIGOL
DS6000 User’s Guide
16-5
Trigger condition
SOP, EOP, RC, Suspended, Exit Suspended
Measure
Cursor
Manual Mode
Voltage Deviation between Cursors (△ V)
Time Deviation between Cursors (△ T)
Reciprocal of △ T (Hz) (1/△ T)
Track Mode
Voltage and Time Values of the Waveform
Point
Auto Mode
Allow to display cursors during auto
measurement
Auto Measurement
Measurements of Maximum, Minimum, Peak-Peak Value, Top
Value, Bottom Value, Amplitude, Average, Mean Square
Root, Overshoot, Pre-shoot, Frequency, Period, Rise Time,
Fall Time, Positive Pulse Width, Negative Pulse Width,
Positive Duty Cycle, Negative Duty Cycle, Delay AB ,
Delay AB , Phase AB , Phase AB
Number of
Measurements
Display 5 measurements at the same time.
Measurement
Range
Screen or cursor.
Measurement
Statistic
Average, Max, Min, Standard Deviation, Number of
Measurements
Frequency Counter
Hardware 6 bits frequency counter
(channels available: DS606x, CH1/CH2; DS610x,
CH1/CH2/CH3/CH4)
Math Operation
Waveform
Operation
A+B, A-B, A× B, A/B, FFT, Editable Advanced Operation, Logic
Operation
FFT Window
Function
Rectangle, Hanning, Blackman, Hamming
FFT Display
Split, Full Screen