Rittal Perforex BC - Scope of Supply

3 Product description
Rittal Perforex BC machining centre 23
EN
3.4 Scope of supply
Unless agreed otherwise, the scope of supply of your Perforex BC machin-
ing centre includes at least the following components:
Quantity
Description
1
Perforex BC machining centre, incl. machine options
1
Operator console
1
Document folder, incl. operating instructions and digital copy
5
Drill in the tool holder
4
Thread cutter in the tool holder
1
Milling cutter in the tool holder
1
Industrial vacuum cleaner, incl. filter bag
Accessories
Consumables
: Min. scope of supply
Depending on its type, your Perforex BC machining centre is delivered in
one packaging unit (BC 1001/1007 HS) or in two packaging units
(BC 1008/2014 HS), incl. all auxiliary equipment.
 Check the packaging carefully for signs of damage.
Any packaging damage may be the cause of a subsequent functional failure.
 Check your Perforex BC machining centre for transport damage.
Note:
Damage or other defects, such as incomplete delivery, should
be reported immediately in writing to the carrier and to Rittal. De-
tails for handling transport damage can be obtained from the
"Transport, mounting and installation notes" pamphlet that you
received prior to the delivery.
 Check the scope of supply for completeness.
Take the exact scope of supply from the order papers and compare with the
delivery note.