1 Notes on documentation
1.1 CE label
Rittal hereby confirms that the Perforex BC machining center is compliant
with the EC Machinery Directive 2006/42/EC. An appropriate declaration of
conformity has been issued.
1.2 Retention of documents
The operating instructions and all other applicable documents are an integral
part of the product. They must be handed over to the persons dealing with
the machine and must always be at hand and available for the operating and
maintenance personnel at all times!
1.3 Symbols in these operating instructions
The following symbols are used in this documentation:
Danger!
Hazardous situation which will result in death or serious in-
jury if the instructions are not followed.
Warning!
Hazardous situation which may lead to death or serious in-
jury if the instructions are not followed.