RKI Instruments GX-3R Pro - Setting the Date;Time (DATE); Setting the Date Format (DATE FORMAT)

GX-3R Pro Operator’s Manual Chapter 5: User Mode and Calibration • 112
5. See “Returning to Measuring Mode (START MEASURE)” on page 117 to return to
Measuring Mode.
Setting the Date/Time (DATE)
1. From the main menu, use AIR to place the cursor next to DATE.
2. Press and release POWER MODE. The date and time display with the year flashing.
3. Use AIR to display the desired year.
4. Press and release POWER MODE to save the setting. The month setting flashes.
5. Repeat Step 3 and Step 4 to enter the month, day, hours, and minutes settings. The date and
time are saved and the instrument returns to User Mode.
6. See “Returning to Measuring Mode (START MEASURE)” on page 117 to return to
Measuring Mode.
Setting the Date Format (DATE FORMAT)
MM/DD/YYYY (factory setting): month/day/year.
YYYY/MM/DD: year, month, day.
DD/MM/YYYY: day, month, year.
1. While in User Mode, use AIR to place the cursor next to DATE FORMAT.
MAINTE 7:49
CO2AIR SETTING
DATE
DATE FORMAT
USER MODE
MAINTE 7:49
MM/DD/YYYY
1/14/2019
7:49
DATE
MAINTE 7:49
DATE
DATE FORMAT
LANGUAGE
USER MODE