RKI Instruments GX-3R Pro - Tips for Using Gas Select Mode

GX-3R Pro Operator’s Manual Appendix C: Gas Select Mode • 188
5. The password screen appears. The first digit is flashing. The password is 2014.
6. Use AIR to select each password number then press POWER MODE to save it and move on
to the next number. To go back a number, press and hold AIR and POWER MODE for a few
seconds. To reverse the direction of change (ie. from increasing to decreasing or vice versa):
a. Press and hold AIR.
b. Immediately press POWER MODE and then release both buttons.
7. The Gas Select Mode menu appears.
8. at the top of the screen indicates that the GX-3R is in Gas Select Mode.
9. Use AIR to move through the Gas Select Mode menu items.
Tips for Using Gas Select Mode
• To scroll from one menu item to the next, press and release AIR. To reverse the scrolling
direction:
a. Press and hold AIR.
b. Immediately press POWER/MODE and then release both buttons.
c. The scrolling direction returns to the original direction when you exit and reenter a menu.
• To skip an item when a question is asked, press and release AIR.
• To enter an item and to save any changes, press and release POWER MODE.
• To change a flashing parameter, press and release AIR. To reverse the direction of change (ie.
from increasing to decreasing or vice versa):
a. Press and hold AIR.
b. Immediately press POWER MODE and then release both buttons.
• To exit an entered menu item without saving a change, press and hold AIR and POWER
MODE for a few seconds.
MAINTE 7:49
0000
PASSWORD
MAINTE 7:49
GAS COMBO
SET DEF ALM--P
DISP MAX SPAN
GAS SELECT MODE
MAINTE