RKI Instruments GX-3R Pro - Performing a Bump Test (BUMP TEST)

177 • Appendix B: Maintenance Mode GX-3R Pro Operator’s Manual
3. Use AIR to scroll to the item whose replacement date you want to view or change.
4. To change the replacement date:
a. With the desired item displayed, press and release POWER MODE.
b. Press and release POWER MODE again to set the replacement date to the current date.
5. Use the AIR button to scroll to the ESCAPE menu item.
6. Press and release POWER MODE to return to Maintenance Mode.
7. See “Exiting Maintenance Mode (START MEASURE)” on page 189 to return to Measuring
Mode.
Performing a Bump Test (BUMP TEST)
See “Performing a Bump Test (BUMP TEST)” on page 68 for instructions.
AIR
AIR
AIR
AIR
AIR
MAINTE 7:49
CH4
MM/DD/YYYY
10/12/2018
SENSOR DATE
MAINTE 7:49
O2
MM/DD/YYYY
1/30/2018
SENSOR DATE
MAINTE 7:49
H2S
MM/DD/YYYY
1/30/2018
SENSOR DATE
MAINTE 7:49
CO
MM/DD/YYYY
10/12/2018
SENSOR DATE
MAINTE 7:49
CO2
MM/DD/YYYY
10/12/2018
SENSOR DATE
MAINTE 7:49
BATTERY
MM/DD/YYYY
10/12/2018
SENSOR DATE
MAINTE 7:49
ESCAPE
AIR