GX-3R Pro Operator’s Manual Chapter 4: Display Mode • 54
2. Press AIR to enter the BUMP DATA screen and to scroll through the installed sensors.
3. When you are done viewing the last bump test date for the sensors, press and release POWER
MODE to return to the BUMP DATA screen in Display Mode.
Date, Time, Temperature Screen (DATE)
The DATE screen shows the date and time of the instrument and the temperature of the
surrounding area.
1. While in Display Mode, press and release POWER MODE until DATE appears.
AIR
AIR
AIR
7:49
MM/DD/YYYY
10/16/2018
CH4
BUMP DATA
7:49
MM/DD/YYYY
10/16/2018
O2
BUMP DATA
7:49
MM/DD/YYYY
10/16/2018
H2S
BUMP DATA
7:49
MM/DD/YYYY
10/16/2018
CO
BUMP DATA
7:49
MM/DD/YYYY
10/16/2018
CO2
BUMP DATA
AIR
AIR
7:49
MM/DD/YYYY
1/14/2019
7:49
DATE 24
°
C
To Next Page
Loading...
