GX-3R Pro Operator’s Manual Appendix B: Maintenance Mode • 186
4. The instrument asks if you are sure you want to restore the defaults.
5. Press and release POWER MODE to perform the default operation. Press and release AIR to
return to Maintenance Mode.
6. The instrument beeps twice and returns to Maintenance Mode.
7. See “Exiting Maintenance Mode (START MEASURE)” on page 189 to return to Measuring
Mode.
Exiting Maintenance Mode (START MEASURE)
1. While in Maintenance Mode, use AIR to place the cursor next to START MEASURE.
2. Press and release POWER MODE.
3. The instrument begins its start-up sequence.
MAINTE 7:49
ARE YOU SURE ?
YES : MODE
M .DEFAULT
MAINTE 7:49
ARE YOU SURE ?
NO : AIR
M .DEFAULT
MAINTE 7:49
LCD CONTRAST
M. DEFAULT
START MEASURE
MAINTENANCE
To Next Page
Loading...
