51 • Chapter 4: Display Mode GX-3R Pro Operator’s Manual
User ID Screen (USER ID)
This screen only appears if D MODE SETTING in User Mode is set to ON (factory setting) and
if ID DISPLAY in Maintenance Mode is set to ON (factory setting is OFF).
Use this screen to select a user ID from the 128 user IDs stored in the GX-3R Pro’s memory.
Before a user ID is selected on a brand new instrument, the user ID is “----------”. The factory-
installed user IDs have a “U_ID_XXX” format.
The user ID provides a way to identify the GX-3R Pro user during a data logging session.
User IDs can only be selected in this menu item. You must use the GX-3R Datalogging Program
to edit the 128 user IDs.
1. After entering Display Mode, press and release POWER MODE until USER ID appears.
2. To change the User ID, press and release AIR. The current User ID flashes.
3. Use AIR to scroll to the desired User ID.
4. Press and release POWER MODE to save the User ID and return to the USER ID screen in
Display Mode.
Station ID Screen (STATION ID)
This screen only appears if D MODE SETTING in User Mode is set to ON (factory setting) and
if ID DISPLAY in Maintenance Mode is set to ON (factory setting is OFF).
Use this screen to select a station ID from the 128 station IDs stored in the GX-3R Pro’s memory.
Before a station ID is selected on a brand new instrument, the station ID is
“----------”. The factory-installed station IDs have a “S_ID_XXX” format.
The station ID provides a way to identify the GX-3R Pro location during a data logging session.
7:49
U_ID_002
CHANGE : AIR
USER ID
7:49
U_ID_002
NO : MODE
USER ID
To Next Page
Loading...
