RKI Instruments GX-3R Pro - Adjusting the Buzzer Volume (BUZZER VOLUME); Changing Instrument Language Back to English (LANGUAGE)

GX-3R Pro Operator’s Manual Chapter 4: Display Mode • 58
2. Press and release AIR. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the BLUETOOTH screen.
Adjusting the Buzzer Volume (BUZZER VOLUME)
The BUZZER VOLUME screen allows you to adjust the volume of the instrument’s buzzer. This
screen only appears if D MODE SETTING in User Mode is set to ON (factory setting).
HIGH (factory setting): Buzzer volume is high.
LOW: Buzzer volume is low.
1. While in Display Mode, press and release POWER MODE until BUZZER VOLUME
appears. The current setting displays on the top line.
2. Press and release AIR. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the BUZZER VOLUME
screen.
Changing Instrument Language Back to English
(LANGUAGE)
This screen only appears if the LANGUAGE item in Maintenance Mode is set to something other
than ENGLISH.
1. While in Display Mode, press and release POWER MODE until the LANGUAGE screen
appears.
7:49
HIGH
NO : MODE
BUZZER VOLUME
7:49
HIGH
CHANGE : AIR
BUZZER VOLUME
7:49
LANGUAGE
CHANGE
TO ENGLISH
YES : AIR
7:49
LANGUAGE
CHANGE
TO ENGLISH
NO : MODE