113 • Chapter 5: User Mode and Calibration GX-3R Pro Operator’s Manual
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to User Mode.
5. See “Returning to Measuring Mode (START MEASURE)” on page 117 to return to
Measuring Mode.
Changing the Instrument Language (LANGUAGE)
The available languages for the GX-3R Pro are: English (factory setting), Japanese, Italian,
Spanish, German, French, Portuguese, Russian, Korean, and Chinese (TC).
If you change the language to anything other than English, the LANGUAGE screen appears in
Display Mode, allowing you to change the instrument language back to English.
1. While in User Mode, use AIR to place the cursor next to LANGUAGE.
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to User Mode.
5. See “Returning to Measuring Mode (START MEASURE)” on page 117 to return to
Measuring Mode.
Turning the Password On/Off (USER PASSWORD)
ON: The GX-3R Pro prompts you for a password when you enter User Mode. The factory-set
password is 0405 but it can be changed as desired.
OFF (factory setting): No password is required to enter User Mode.
1. While in User Mode, use AIR to place the cursor next to USER PASSWORD.
2. Press and release POWER MODE. The current setting flashes.
MAINTE 7:49
DATE FORMAT
LANGUAGE
USER PASSWORD
USER MODE
MAINTE 7:49
LANGUAGE
USER PASSWORD
ROM / SUM
USER MODE
To Next Page
Loading...
