45 • Chapter 4: Display Mode GX-3R Pro Operator’s Manual
Chapter 4: Display Mode
This section describes Display Mode which is accessible from Measuring Mode. See the table 8
below for a list of Display Mode’s menu items, a short description of each item, and the page
number for further description.
Table 8: Display Mode Items
Display Mode
Menu Item
Description
PEAK (page 47) Displays each sensor’s Peak reading.
STEL (page 47) Displays the STEL readings (CO, H
2
S, and CO
2
/super toxic only).
TWA (page 48) Displays the TWA readings (CO, H
2
S, and CO
2
/super toxic only).
HC GAS LIST
(page 48)
A
Change the target gas for the catalytic sensor.
•CH4 (methane)
• i-C4H10 (isobutane)
• H2 (hydrogen)
• CH3OH (methanol)
• C2H2 (acetylene)
• C2H4 (ethylene)
• C2H6 (ethane)
• C2H5OH (ethanol)
• C3H6 (propylene)
• C3H6O (acetone)
• C3H8 (propane)
• C4H6 (butyne)
• C5H10 (cyclopentane)
• C6H6 (benzene)
• n-C6H14 (hexane)
• C7H8 (toluene)
• n-C7H16 (heptane)
• C8H10 (xylene)
• n-C9H20 (nonane)
• EtAc (ethyl acetate)
• IPA (isopropyl alcohol)
• MEK (methyl ethyl ketone)
• MMA (methyl methacrylate)
• DME (dimethyl ether)
• MIBK (methyl isobutyl ketone)
• THF (tetrahydrofuran)
USER ID
(page 51)
C
View and/or change the User ID.
STATION ID
(page 51)
C
View and/or change the Station ID.
CAL DATA
(page 52)
D
Displays the last calibration date for each sensor.
BUMP DATA
(page 53)
E
Displays the last bump test date for each sensor.
DATE (page 54) Displays the current date, time, and temperature.
ALARM POINTS
(page 55)
View alarm points
To Next Page
Loading...
