Robopac Masterplat PLUS TP3 PGS - Machine Models Description

ENG
TECHNICAL INFORMATION
26
3.1.1. MACHINE MODELS DESCRIPTION
Type of machine
General features
Masterplat PLUS FRD
Masterplat PLUS TP3
FRD
Masterplat PLUS LP
FRD
Masterplat with spool carriage of “FRD” type or “FRD” type for mesh.
Masterplat PLUS PGS
Masterplat PLUS TP3
PGS
Masterplat PLUS LP
PGS
Masterplat with spool carriage of “PGS” type.
Masterplat FREEZER
Maintaining the same features as the standard machine, this model can operate at an
ambient temperature of -30 ÷ +40°C.
The control panel features a heating system to protect devices against low
temperatures.
Masterplat INOX
Maintaining the same features as the standard machine, this model is made of
stainless steel to allow working in particular environments. On request, it can feature a
control panel with heating system to protect devices against low temperatures.
In this case the machine can operate at an ambient temperature of -30 ÷ +40°C.
Table: Spool carriage features
Spool carriage type
General features
FRD
Spool carriage of “FRD” and “FRD for mesh” type with friction roller, mechanical brake
and manual adjustment of film stretch.
PGS
Spool carriage of “PGS” type with motorised pre-stretching rollers and electronically
controlled film tensioning. Pre-stretch is fixed (250%).