INFORMATION ON HANDLING AND INSTALLATION
4.5. INSTALLATION OF THE MACHINE
The machine must be installed in an area which fulfils the requirements indicated in paragraph “Installation
environment characteristics”.
If necessary, identify the exact position by plotting the coordinates for correct positioning.
Danger - warning
Authorised technical service personnel must perform installation and assembly operations.
Proceed as follows:
1.
Insert the forklift truck forks in the specially designed spaces provided in the base.
2.
Lift the machine from the pallet (if any).
Danger - warning
To perform the operation in safety conditions, insert some wooden blocks under the forks of the forklift
truck and place everything on the floor.
3.
Place the machine in the area assigned for assembly.
Important
The resting surface must be smooth and well levelled.
Masterplat PLUS FRD-PGS
Masterplat PLUS TP3 FRD-PGS
To Next Page
Loading...
