Robopac Masterplat PLUS TP3 PGS - Main Menu Page

79
INFORMATION ABOUT THE USE
ENG
6.4. "MAIN MENU" PAGE
Ref.
Button
Description
1
Wrapping cycle
2
Table rotation speed (rpm)
3
Carriage speed
4
Wrapping end delay
5
Access to “Manual Controls” Menu. (See “Manual Controls Menu”)
6
Access to “Film Tensioning” Menu (See “Film tensioning menu)
7
Access to “Other” Menu (See “Other Menu”)
8
Intermediate wrapping turns
9
Intermediate and upper wrapping turns
10
Access to “Settings” Menu (See “Settings Menu”)
11
Synchronisation of the machine: table in initial position, carriage down, presser up. If “JOG”
is pressed again, movements will stop
12
Access to the “Recipe” Menu (See “Recipe” Menu)