INFORMATION ABOUT THE USE
Page for entering the password to change the user; Turn
to select the digit and press to confirm.
Select “C” to delete the password.
Select the “Checkmark” to confirm the password.
Enter the password (default 9999) to lock the panel.
When the panel is locked, the edge of the screen is
yellow.
Enter the password to unlock the panel.
To change the panel lock password, enter a new
password and select the “checkmark”. Enter the chosen
password again and confirm to update its value.
CELL = Load cell reading instant value.
OFFSET = Offset value (with film tensioning = 0).
Press and keep pressed (for about 3 seconds) to set the
parameter (only after logging in).
To Next Page
Loading...
