Robustel R3000 Quad - Page 54

Robustel R3000 Quad User Guide
RT_UG_R3000 Quad_v.3.0.0 28 May, 2017 54 / 131
Confidential
General Settings @ Access Point
Item
Description
Default
SSID
Enter the Service Set Identifier, the name of your wireless
network. The SSID of a client and the SSID of the AP must be
identical for the client and AP to be able to communicate with
each other. Enter 1 to 32 characters.
router
Broadcast SSID
Click the toggle button to enable/disable the SSID being
broadcast. When enabled, the client can scan your SSID. When
disabled, the client cannot scan your SSID. If you want to connect
to the router AP, you need to manually enter the SSID of router
AP at WiFi client side.
ON
Security Mode
Select from “Disabled”, “WPA” or “WEP”.
 Disabled: User can access the WiFi without password
Note: It is strongly recommended for security purposes that
you do not choose this kind of mode.
 WPA: Include WPA and WPA2. Personal versions of WPA
(Wi-Fi Protected Access), also known as WPA/WPA-PSK
(Pre-Shared Key), provide a simple way of encrypting a
wireless connection for high confidentiality.
 WEP: Wired Equivalent Privacy provides encryption for
wireless device’s data transmission
Disabled
WPA Version
Select from “Auto”, “WPA” or “WPA2”.
 Auto: Router will choose automatically the most suitable
WPA version
 WPA2 is a stronger security feature than WPA
Auto
Encryption
Select from “Auto”, “TKIP” or “AES”.
 Auto: Router will choose automatically the most suitable
encryption
 TKIP: Temporal Key Integrity Protocol (TKIP) encryption uses
a wireless connection. TKIP encryption can be used for
WPA-PSK and WPA 802.1x authentication
Note: It's not recommended to use TKIP encryption in
802.11n mode.
 AES: AES encryption uses a wireless connection. AES can be
used for CCMP WPA-PSK and WPA 802.1x authentication.
AES is a stronger encryption algorithm than TKIP
Auto
PSK Password
Enter the Pre share key password. When router works as AP
mode, enter Master key to generate keys for encryption. A PSK
Password is used as a basis for encryption methods (or cipher
types) in a WLAN connection. The PSK Password should be
complicated and as long as possible. For security reasons, this
PSK Password should only be disclosed to users who need it, and
it should be changed regularly. Enter 8 to 63 characters.
Null
Group Key Update Interval
Enter the time period of group key renewal.
3600