Robustel R3000 Quad User Guide
RT_UG_R3000 Quad_v.3.0.0 28 May, 2017 72 / 131
Confidential
Select from “DHgroup2”, “DHgroup5”, “DHgroup14”, “DHgroup15”,
“DHgroup16”, “DHgroup17” or “DHgroup18” to be used in key negotiation
phase 1.
Select from “PSK”, “CA”, “xAuth PSK” and “xAuth CA” to be used in IKE
negotiation.
PSK: Pre-shared Key
CA: x509 Certificate Authority
xAuth: Extended Authentication to AAA server
Enter the pre-shared key.
Select from “Default”, “FQDN” and “User FQDN” for IKE negotiation.
Default: Use an IP address as the ID in IKE negotiation
FQDN: Use an FQDN type as the ID in IKE negotiation. If this option is
selected, type a name without any at sign (@) for the local security
gateway, e.g., test.robustel.com.
User FQDN: Use a user FQDN type as the ID in IKE negotiation. If this
option is selected, type a name string with a sign “@” for the local
security gateway, e.g., test@robustel.com.
Select from “Default”, “FQDN” and “User FQDN” for IKE negotiation.
Default: Use an IP address as the ID in IKE negotiation
FQDN: Use an FQDN type as the ID in IKE negotiation. If this option is
selected, type a name without any at sign (@) for the local security
gateway, e.g., test.robustel.com.
User FQDN: Use a user FQDN type as the ID in IKE negotiation. If this
option is selected, type a name string with a sign “@” for the local
security gateway, e.g., test@robustel.com.
Set the lifetime in IKE negotiation. Before an SA expires, IKE negotiates a new
SA. As soon as the new SA is set up, it takes effect immediately and the old
one will be cleared automatically when it expires.
Enter the private key under the “CA” and “xAuth CA” authentication types.
Enter the username used for the “xAuth PSK” and “xAuth CA” authentication
types.
Enter the password used for the “xAuth PSK” and “xAuth CA” authentication
types.