100
CoaguChek INRange User’s Manual
Reminders and Meter Settings
100
Button Click The meter can be set to emit a click sound
whenever you press a button.
To set the button click:
1 Select Button Click and press the Enter
button
to open the corresponding menu.
The current status is indicated by a green dot on
the right.
2 Use the up/down arrows button to select
On or Off.
3 Press the Enter button to confirm the
selection, which is now indica
ted by the green
dot.
4 Press the Enter button again to save the
selected sta
tus.
The setting of the beeper volume also applies to
the button click. If the beeper volume is set to
Off, the button click will also be muted.
6HWWLQJV
%HHSHU9ROXPH
6HW
7DUJHWV
5HVXOW)RUPDW
'LVSOD\%ULJKWQHVV
8QLWV
%XWWRQ&OLFN
%XWWRQ&OLFN
2II
2Q
6DYH
To Next Page
Loading...
