Roche CoaguChek INRange - Data Transfer

Reminders and Meter Settings
CoaguChek INRange User’s Manual
101
Data Transfer The CoaguChek INRange meter can communi-
cate with a computer and/or other devices via
USB or a wireless Bluetooth connection. Using
the Data Transfer option (see the chapter Trans-
ferring data starting on page 66) enables the
transfer mode (USB or Bluetooth) preselected
here.
To set up data transfer:
1 Select Data Transfer and press the Enter
button
to open the corresponding menu.
The currently set transfer mode is indicated by a
green dot on the right.
2 Use the up/down arrows button to select
the desired transfer mode.
3 Press the Enter button to confirm the
selection, which is now indica
ted by the green
dot.
4 Press the Enter button again to save the
selected transfer mode.
6HWWLQJV
%HHSHU9ROXPH
6HW
7DUJHWV
5HVXOW)RUPDW
'LVSOD\%ULJKWQHVV
'DWD7UDQVIHU
%XWWRQ&OLFN
'DWD7UDQVIHU
%OXHWRRWK
1RQH
86%
6DYH