Roche CoaguChek INRange - Performing a test

44
CoaguChek INRange User’s Manual
Testing a Capillary Blood Sample
44
Performing a test 1 Wash your hands with soap and warm water.
Dry them thoroughly.
2 Place the meter on a level, vibration-free sur-
face or hold it in y
our hand so that it is roughly
horizontal.
3 Power the meter on by pressing the Enter
button
. Alternatively, you can insert a test
strip to power it on, which will put the meter—
after startup—into test mode directly.
WARNING
Residues of water on the skin can dilute the drop
of blood and produce false results.