Cleaning and Disinfecting the Meter and the Lancing Device
CoaguChek INRange User’s Manual
107
1 With the meter turned off, wipe the meter’s
exterior clean, using one of the above men-
tioned cleaning agents.
2 With a fresh dry cloth or lint-free tissue, wipe
a
way residual moisture and fluids after clean-
ing the housing.
3 Allow wiped areas to dry for at least 10 min-
utes before performing a test.
Cleaning the test strip guide 1 Remove the test strip guide cover to clean it.
(Use y
our thumbnail to open the cover of the
test strip guide by pressing its front edge
upward.) Move the cover safely away from the
meter.
2 Rinse the cover with warm water or wipe it
clean using the solutions recommended
abo
ve. Let the test strip guide cover dry for at
least 10 minutes before re-attaching it.
To Next Page
Loading...
