Roche CoaguChek INRange - Set Targets

Reminders and Meter Settings
CoaguChek INRange User’s Manual
95
Set Targets
A target range defines the minimum and maxi-
mum values which should be achieved during
therapy. Reports and statistics can then include
information about values within, above or below
this target range.
1 Select Set Targets and press the Enter
button
to open the corresponding menu.
The currently selected time period, which will be
used as the default time period for reports and
statistics, is indicated by a green dot on the right.
2 Select the desired time period.
3 Press the Enter button to confirm the
selected time period, which is now indica
ted
by the green dot.
4 Press the Enter button again to proceed to
the next step.
A target range can only be set and used if the
unit is set to INR.
6HWWLQJV
%HHSHU9ROXPH
6HW7DUJHWV
5HVXOW)RUPDW
/DQJXDJH
8QLWV
7
LPH'DWH
6HW7DUJHWV
'D\V
'D\V
'D\V
'D\V
7
LPH3HULRG
1H[W