66
CoaguChek INRange User’s Manual
Reviewing and Handling Data
66
Transferring data
The CoaguChek INRange meter can communi-
cate with a computer and/or other devices either
via USB or a wireless Bluetooth connection. You
can use this feature for the following purposes:
• further evaluation of stored test results in suit-
able computer applica
tions
• data archiving
The preferred method (USB/Bluetooth) used for
da
ta transfer has to be selected in the meter set-
tings before transferring data for the first time.
Otherwise, a corresponding message will be
displayed.
Both methods will be described separately on
the following pages. If you are using a Bluetooth
connection, pairing has to be completed during
setup before you can perform a data transfer
(see Data Transfer on page 101).
It is not possible to perform a test while a USB
cable is plugged in.
7UDQVIHU'DWD
1HLWKHU86%QRU%OXHWRRWK
VHOHFWHG&KHFN6HWWLQJV
&DQFHO
To Next Page
Loading...
