Roche CoaguChek INRange - Page 96

96
CoaguChek INRange User’s Manual
Reminders and Meter Settings
96
The current activation status is indicated by a
green dot on the right.
5 Use the up/down arrows button to select
On or Off.
6 Press the Enter button to confirm the
selection, which is now indica
ted by the green
dot.
7 Press the Enter button again to proceed to
the next step.
A newly set or edited target range is only valid
for tests performed after this setting is made,
and will not affect test results already stored in
memory.
6HW7DUJHWV
2Q
2II
1H[W