Roche CoaguChek INRange - Page 45

Testing a Capillary Blood Sample
CoaguChek INRange User’s Manual
45
4 Check the battery level during startup (or in
the Main Menu afterwards).
5 Check that the time and date are correct. If
necessar
y, re-enter time and date (see page
91 ff).
If you have powered on the meter by inserting a
test strip, the meter will skip the following
steps 6 to 9 and proceed to the steps described
on page 47.
6 After startup, Test is preselected and high-
lighted. Press the Enter button
to start the
test.
If the meter displays a Battery Low message,
you can still perform up to 3 tests. Replace the
batteries as soon as possible.
CoaguChek
®
 6HS
0DLQ0HQX
7HVW

6HWWLQJV
5HPLQGHUV
0\5HVXOWV
6HS
2WKHU