Roche CoaguChek INRange - Page 47

Testing a Capillary Blood Sample
CoaguChek INRange User’s Manual
47
• The meter reads the strip information (pro-
vided by the barcode on the test strip) and
checks if it ma
tches code chip information
already stored in the meter.
• If you have not inserted the code chip yet or
in case of a misma
tch, you will be prompted
to insert the correct code chip.
• When the test strip check has been com-
pleted successfully
, the meter indicates that
the test strip is warming up.
• Once the warming-up process is complete,
the meter displays the test strip and blood
drop symbols
. These symbols and a beep tone
indicate that the meter is ready to perform the
test and is waiting for you to apply blood.
At the same time, a 180-second countdown
begins. You must apply the drop of blood to
the test strip within this time, otherwise you
will receive an error message.
7HVW
5HDGLQJVWULS
7HVW
,QVHUWFRGHFKLS

7HVW
7HVWVWULSZDUPLQJXS
7HVW
$SSO\EORRG
VHFRQGVUHPDLQLQJ
