46
CoaguChek INRange User’s Manual
Testing a Capillary Blood Sample
46
The test strip symbol prompts you to insert a test
strip.
7 Remove a test strip from its container. Imme-
dia
tely after removing a test strip, close the
container again with the stopper.
8 Hold the test strip so that the lettering, the
arrows and the blood drop symbols are facing
upw
ard.
9 Slide the test strip into the test strip guide in
the direction indica
ted by the arrows.
Slide the test strip in as far as it will go.
A beep tone indicates that the test strip has
been detected.
NOTICE
Exposure to external influences (e.g. humidity)
ma
y deteriorate the test strips and may lead to
error messages.
To Next Page
Loading...
