Roche CoaguChek INRange - Page 33

Starting Up
CoaguChek INRange User’s Manual
33
The meter now displays the screen for setting
the time format.
5 Use the up/down arrows button to select
the time forma
t for the display (24 hour or 12
hour am/pm). The newly selected format is
highlighted (blue).
6 Press the Enter button to confirm the
selection, which is now indica
ted by the green
dot.
7 Press the Enter button again to save the
setting
. The screen for setting the time and
date follows next.
All test results are saved together with time and
date. Analyzing stored test results or using
reminders will only work with time and date
correctly set. Always check (and, if necessary
adjust) the time and date after replacing the
batteries.
Throughout this manual the 24 hr format is
used on example screens.
7LPH'DWH
KU)RUPDW
KU)RUPDW
1H[W
7LPH'DWH
30

6HS
1H[W


7LPH'DWH

6HS
1H[W

