Roche CoaguChek INRange - Page 35

Starting Up
CoaguChek INRange User’s Manual
35
Select the preferred coagulation unit (for dis-
playing a test result) as the last step of this initial
setup process. The currently active unit is indi-
cated by a green dot.
11 Use the up/down arrows button to select
y
our preferred unit. The newly selected unit is
highlighted.
12 Press the Enter button to confirm the
selection, which is now indica
ted by the green
dot.
13 Press the Enter button again to save the
selected unit.
The initial setup is now finished, and the meter
displa
ys the Main Menu. For a complete over-
view of setup options (including those which are
not par
t of the initial setup) see the chapter
Meter settings starting on page 87.
If you wish to power off the meter after setup:
14 Press and hold the Enter button until the
meter pow
ers off.
8QLWV
,15
4
6HF
6DYH
0DLQ0HQX
7HVW

6HWWLQJV
5HPLQGHUV
0\5HVXOWV
6HS
2WKHU