Roche CoaguChek INRange - Page 68

68
CoaguChek INRange User’s Manual
Reviewing and Handling Data
68
To connect the meter to a computer, you will
need a suitable USB cable (included in the kit).
Connect the micro USB type B plug to the meter
(the USB port is located on the right-hand side of
the meter) and the USB type A plug to the com-
puter. In order to transfer data, always connect
the cable to the meter first and then to the com-
puter.
When the connection has been established and
the download command has been received, the
meter informs you about the progress.
Data transfer must be actively triggered by the
computer application or device app used for
reading the stored data.
To save battery power, remove the USB cable
after transferring the test results to the PC.
'DWD7UDQVIHU
'DWD7UDQVIHU
&RPSOHWH
7UDQVIHU'DWD
7UDQVIHUULQJGDWD