72
CoaguChek INRange User’s Manual
Reviewing and Handling Data
72
5 Connect the meter to the computer via USB
cable.
The display shows “Connected” when the con-
nection has been established.
6 Open a window on your computer that dis-
pla
ys the contents of the meter (as a remova-
ble disk drive).
7 Double click on START.HTM to open the file
in y
our standard Internet browser.
8 After you have finished using the embedded
repor
ts, unplug the USB cable from the meter
and the computer.
When the meter is connected to a computer, it
will not be powered via the USB cable and will
not power off automatically. To save battery
power always remove the USB cable when the
connection is no longer in use.
5HSRUWV
&RQQHFWHG
To Next Page
Loading...
