Reviewing and Handling Data
CoaguChek INRange User’s Manual
75
Time period Starting from your most recent test result, you
can choose a Time Period going back 60, 90,
120, 180 or 365 da
ys. This setting is applied to
both the Trend and Target graph.
Trend graph All test results stored within a selected period of
time will be displayed in the chart as linear val-
ues. Each test result (represented by the sym-
bol) is plotted along the time axis according to
the time when the test was performed. Test
results above or below the measuring
range are marked accordingly. All test results are
connected by a line in chronological order.
Vertical lines on the Trend graph mark the
beginning of each week.
To Next Page
Loading...
