Rockwell Automation Allen-Bradley Kinetix 5300 - Kinetix 5300 Power Wiring Diagrams

40 Rockwell Automation Publication 2198-RM005A-EN-P - October 2020
Chapter 3 Dimensions, Cables, and Wiring
Figure 18 - Single-phase Amplifiers (One AC Line Filter Per Drive)
Feeder and branch short circuit protection is not illustrated.
Kinetix 5300 Power Wiring Diagrams
For Kinetix 5300 drive power specifications, see Kinetix Servo Drives Specifications Technical
Data, publication KNX-TD003
. For Kinetix 5300 drive interconnect diagrams, see Kinetix 5300
Single-axis EtherNet/IP Servo Drives, publication 2198-UM005
.
L1
L2
L3
L1
L2
L1
L2
L1
L2
IPD
L1
N
IPD
L1
N
IPD
L1
N
L1
L2
L1
L2
L1
L2
E
E
E
IPD
L1
L2
IPD
L1
L2
IPD
L1
L2
Bonded Cabinet Ground Bus
Transformer (WYE) Secondary
Ground Grid or Power Distribution Ground
AC Line
Filter
AC Line
Filter
AC Line
Filter
Kinetix 350 Drives (System A)
Single-phase AC Input
Grounded
Neutral
Grounded Neutral
Kinetix 350 Drives (System B)
Single-phase AC Input
Kinetix 350 Drives (System C)
Single-phase AC Input
M1
Contactor
Input Fusing
2097-V31PRx-LM 2097-V33PRx-LM
IMPORTANT
An AC line filter for each drive is the preferred configuration and
required for CE compliance.