Rockwell Automation Publication D2-3518-4 - January 2020 11
Introduction Chapter 1
Manual Conventions
Parameter names: In most instances, parameter names are shown as the
parameter name followed by the parameter number. The parameter name is
preceded by inverter or rectifier for reference.
For example: inverter PI Control (125).
Getting Assistance from
Rockwell Automation
If you have any questions or problems with the products described in this
instruction manual, contact your local Rockwell Automation sales office. For
technical assistance, call 1-888-926-6786, Option 1.
Also, see Rockwell Automation Support
on the back cover of this user manual for
technical support contact information.
To Next Page
Loading...
