Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Identifying the Power Module by Model Number

24 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 2 About the Drive
Identifying the Power
Module by Model Number
Each LiquiFlo 2.0 AC power module is identified by its model number. See
Figure 8
. This number appears on the shipping label and on the nameplate of the
power module. Power ratings are provided in Tab le 2
.
Figure 8 - Identifying the Power Module Model Number
Table 2 - Drive Assembly and Power Module Ratings
Drive Assembly ID
Number
Power Module
Model Number
Enclosure
Rating
Input
Power
(KVA)
Input Voltage
(V)
Input
Current
(2)
(Amps)
(2) 460 A with refrigerant, 405 A with water as coolant.
Output
Current
at 2 kHz
(3)
(Amps)
(3) 110% output current capability for one minute, 150% output current capability for 5 sec.
180264-A03 LF200460AAR NEMA 1 337 480 ±10% 405 405
180264-A06 LF200608CCR 505 608 608
180580-A07 LF200900CCR 673 900 900
180580-A09
(1)
(1) No overload rating for 180580-A09. 100% output current capability.
LF201215CCR 1010 1215 1215
LF20 0608CC R
LF20 = LiquiFlo 2.0
Continuous Ampere Rating
and Frame Size
0460AA = 405 amps*, frame 2AA
0608CC = 608 amps, frame 2CC
0900CC = 900 amps, frame 4AA
1215CC = 1215 amps, frame 4CC
Cooling Method
R = refrigerant/water
* 460 A with refrigerant, 405 A with water as coolant