36 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 3 Planning the Installation
Table 4 - Environmental Conditions
Determining Total Area Required Based on Drive Dimensions
Overall drive dimensions are identified in these figures:
• Frame 3 drives 180264-A03 and 180264-A06 in Figure 14
• Frame 4 drives 180580-A07 and 180580-A09 in Figure 16
Overall power module dimensions are identified in these figures:
• Frame 3 power modules LF200460AAR and LF200608CCR in Figure 15
• Frame 4 power modules LF200900CCRand LF201215CCR in Figure 17
Condition Specification
Operating Temperature
(inside NEMA/UL Type 1 enclosure)
0...+55 °C
(1)
(32...131 °F)
(1) With typical heat rise inside a cabinet, 40 °C (104 °F) ambient outside usually results in 55 °C (131 °F) inside.
Ambient Temperature
(outside NEMA/UL Type 1 enclosure)
0...+40 °C (32...104 °F)
Storage Temperature (Ambient) - 40...65 °C (- 40...149 °F)
Humidity 5%...95% (non-condensing)
To Next Page
Loading...
